Biodegradable PLA Resin Suppliers
Buyers seeking a biodegradable PLA resin supplier or OEM grade can find and assess candidates on Towobo, then compare them with trade-show directories, industry associations, distributors, and direct producer references. Match the resin to the actual process and finished article: injection moulding, sheet extrusion and thermoforming, film, fibre, coating, or filament can require different melt flow, crystallisation, heat performance, additives, and drying conditions. Verify technical, food-contact, biobased, and compostability claims for the exact grade and finished-product market.
도매 조달을 시작할 준비가 되셨나요?
수십만 명의 구매자가 Towobo의 검증된 공급업체로부터 조달하고 있습니다.
Browse PLA Resin Suppliers on Towobo →PLA grades and their applications
PLA is available in several grades differentiated by D-isomer content, which governs crystallinity, heat resistance, and mechanical properties. Standard PLLA (high L-isomer, low D-content, below 2% D): semi-crystalline, higher heat resistance than amorphous PLA, suitable for thermoformed trays, injection-moulded rigid packaging, and technical applications. Amorphous PLA (higher D-content, above 8% D): transparent, lower heat resistance, faster crystallisation with nucleating agents — used for clear cold cups, film, and window film for packaging. Heat-resistant PLA (typically PLLA with crystallisation-enhancing nucleating agent and fill): suitable for hot-fill containers and food service applications up to approximately 80–85°C. Standard PLA without heat treatment has a heat deflection temperature (HDT) of only 50–60°C — not suitable for hot beverages or hot-fill applications without modification. For injection-moulded disposable cutlery, standard extrusion-grade PLA (MFI 5–20 g/10 min at 190°C/2.16kg) is the primary specification. For blown film, a lower MFI grade (2–5 g/10 min) with adequate melt strength is required. NatureWorks (US) and Total Corbion (Netherlands) are the dominant producers; Chinese producers including Haizheng Biomaterials are growing in volume.