Fournisseurs en Gros de Modules LED & Affichage

LED and display products span a broad spectrum: SMD LED components — 0402, 0603, 0805, 3528, 5050, 2835, 3030 SMD LEDs in single-colour (red, green, blue, white, IR, UV), bicolour, and RGB configurations; used for indication, backlighting, display, and illumination; key specifications include luminous intensity (mcd), forward voltage (Vf), forward current (If), wavelength (dominant/peak nm), and viewing angle (half-angle); LED modules and assemblies — LED strip lights (flexible PCB-based strips with SMD LEDs, 12V or 24V, waterproof or non-waterproof — IP20/IP44/IP65/IP67), rigid LED bar modules, LED panel modules for backlighting, and high-power LED modules for industrial lighting; TFT LCD display modules — Thin Film Transistor LCD panels with integrated backlight, driver IC, and flex cable, available in 1" to 32"+ sizes, parallel (MCU 8/16-bit) or serial (SPI, I²C) interfaces, with touch overlay options (resistive or capacitive); OLED display modules — organic LED panels offering superior contrast, wide viewing angle, and thin profile vs TFT LCD; available in monochrome (0.91", 0.96", 1.3" SSD1306 I²C modules are ubiquitous in electronics prototyping) and colour (SSD1351, ST7789 based) variants; e-Paper (electronic ink) display modules — ultra-low power bistable displays that retain image without power, used in electronic shelf labels, smart cards, and IoT displays; and industrial HMI (Human Machine Interface) panels — ruggedised LCD/TFT displays with industrial temperature range, vibration resistance, and optionally integrated touchscreen and controller for PLC/SCADA applications.

LED colour and brightness consistency is critical for applications requiring uniform appearance across multiple units (LED signage, backlighting, architectural lighting). LED binning is the process of sorting LEDs into bins based on measured forward voltage (Vf), luminous intensity, and dominant wavelength — ensuring that units from the same bin are visually and electrically consistent. ANSI/NEMA bin nomenclature (e.g. 5700K, 80 CRI) is used for white LEDs in lighting applications; Munsell colour system bins are used for coloured LEDs. Major Chinese LED chip manufacturers (Sanan Optoelectronics, Epitop, HC Semitek) produce LED chips in standardised bins; LED module assembly manufacturers (many in Shenzhen's Baoan and Nanshan districts) purchase binned chips and assemble modules to specification. For wholesale buyers procuring LED strips and modules for retail or architectural use, always specify the required bin code range (e.g. CCT within ±200K, CRI ≥80) in the purchase specification. For CE and FCC compliance of LED modules and drivers: LED luminaires (complete lighting fittings) require CE marking under the Low Voltage Directive (LVD) and EMC Directive, plus the Ecodesign Regulation for energy performance. LED strip lights without integrated driver are typically not independently CE-marked but must be used with a CE-marked driver. FCC Part 15 applies to LED products generating RF emissions in the US market.