Question 1

What is the difference between FDA 510(k) clearance and FDA approval?

Accepted Answer

510(k) clearance and FDA approval (PMA) are two different pathways for medical devices to reach the US market. 510(k) clearance is granted when a manufacturer demonstrates that a new device is substantially equivalent to a legally marketed predicate device — FDA is not making a finding of safety and effectiveness but rather that the new device is "at least as safe and effective" as the predicate. 510(k) is the route for most Class II devices. PMA (Premarket Approval) is required for Class III devices and involves a more rigorous scientific review of clinical trial data — FDA makes an affirmative finding that the device is safe and effective for its intended use. PMA approval is more demanding, more expensive, and takes longer. For buyers: a 510(k)-cleared device can be marketed in the US; a device that has only received CE marking in Europe cannot be sold in the US unless it also has FDA clearance or approval. Always verify the FDA clearance number at accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm.

Question 2

What does ISO 13485 certification mean for a medical device manufacturer?

Accepted Answer

ISO 13485:2016 certification means the manufacturer has implemented and maintains a Quality Management System (QMS) that has been audited and certified by an independent accredited certification body against the ISO 13485 standard — which is specifically designed for the requirements of medical device regulatory compliance. It demonstrates that the company has formal processes for design and development controls, production and process controls, sterile device manufacturing (if applicable), risk management (ISO 14971), complaint handling, vigilance reporting, corrective and preventive action (CAPA), and traceability. For buyers, ISO 13485 certification is a necessary — but not sufficient — indicator of supplier quality. It demonstrates a baseline of process discipline but must be verified against the specific scope of certification (which device types and processes are covered) and supplemented by product-specific testing and regulatory certification evidence (CE certificates, 510(k) numbers).

Question 3

How are medical devices classified under EU MDR?

Accepted Answer

EU MDR 2017/745 classifies medical devices into four classes based on risk, using classification rules in Annex VIII: Class I (lowest risk — non-invasive devices with limited body contact, most surgical instruments that are non-sterile and non-measuring, hospital furniture, basic wound contact dressings); Class IIa (low-to-medium risk — devices intended for short-term invasive use, active devices for diagnosis, dental materials in direct contact with mucous membranes); Class IIb (medium-to-high risk — devices for long-term use in the body, blood-contacting devices, active therapeutic devices delivering energy, contraceptive devices); Class III (highest risk — devices that are in contact with the central nervous system, in direct contact with the heart, absorb in the body, or administer drugs/biologics). Classification determines the conformity assessment route: Class I (Is/Im) uses a Notified Body for the sterile/measuring aspects; Class IIa and above require a Notified Body for full QMS and/or product certification.

Question 4

What regulations apply to medical device imports into China?

Accepted Answer

Medical devices imported into China must be registered with the National Medical Products Administration (NMPA) before sale. China uses a three-class system (Class I, II, III) parallel to international frameworks: Class I devices are lowest risk and file with provincial administrations; Class II and III devices must register with NMPA centrally. The application requires: clinical data (either Chinese clinical trials or a pathway using overseas clinical data with supplemental evidence); product technical documentation (standards compliance, test reports from NMPA-recognised labs); ISO 13485 certificate from NMPA-recognised certification bodies; a China local agent (mandatory for overseas manufacturers — the agent acts as the legal representative for post-market obligations); and factory inspection by NMPA inspectors for Class III devices. Registration timelines: Class II approximately 2–3 years; Class III 3–5 years. For buying from Chinese manufacturers exporting to regulated markets: verify that the specific export model has the required regulatory clearances for the destination market (CE MDR for EU, 510(k) for US) — Chinese domestic NMPA registration does not substitute for destination market regulatory clearance.

Question 5

What is Unique Device Identification (UDI) and why does it matter?

Accepted Answer

Unique Device Identification (UDI) is a mandatory system for labelling and tracking medical devices throughout distribution and use. Both the FDA (21 CFR Part 830, GUDID database) and EU MDR (Article 27, EUDAMED database) require most medical devices to carry a UDI label comprising a Device Identifier (DI — fixed portion identifying the device and manufacturer) and Production Identifier (PI — variable portion for lot/batch number, serial number, manufacturing date, expiry date). For EU MDR, manufacturers must register the Basic UDI-DI in EUDAMED before placing devices on the EU market. For FDA, manufacturers must submit device information to the GUDID (Global Unique Device Identification Database) at accessgudid.nlm.nih.gov. For wholesale buyers: require UDI labels on all device packaging; UDI compliance is a marker of a manufacturer's regulatory maturity and is required for hospital inventory management systems. Non-UDI-labelled products from non-compliant manufacturers create import compliance risk.

Dispositifs Médicaux en Gros : Meilleurs Fournisseurs Mondiaux

Medical device categories and product scope

Dispositifs Médicaux en Gros : Meilleurs Fournisseurs Mondiaux

Medical device categories and product scope

FDA 510(k), PMA, and De Novo: US market clearance explained

EU MDR 2017/745 and CE marking for medical devices

ISO 13485, ISO 14971, and medical device quality systems

MOQ and procurement terms for wholesale medical devices

Frequently asked questions

What is the difference between FDA 510(k) clearance and FDA approval?

What does ISO 13485 certification mean for a medical device manufacturer?

How are medical devices classified under EU MDR?

What regulations apply to medical device imports into China?

What is Unique Device Identification (UDI) and why does it matter?

Demander un Devis

Pourquoi Demander un Devis?

Pages connexes