Fournisseurs en Gros de Câbles & Fils Électroniques
Approvisionnez en gros câbles équipements, câbles rubans, câbles coaxiaux, câbles blindés, câbles plats FFC/FPC et faisceaux câblés auprès de fabricants vérifiés sur Towobo. Le marché mondial des câbles électroniques dépasse 100 milliards USD.
Prêt à sourcer en gros ?
Des milliers d'acheteurs s'approvisionnent auprès de fournisseurs vérifiés sur Towobo.
Trouver des fournisseurs en gros sur Towobo →Electronic cable types and specifications
Electronic cables and wires for wholesale sourcing: hook-up wire and equipment wire — single-conductor insulated wire for internal equipment wiring; key standards include UL 1007/1015 (600V equipment wire), UL 1061 (300V computer hookup wire), and CSA TEW/TFN; conductor materials (tinned copper, bare copper, silver-plated copper) and insulation materials (PVC, PTFE/Teflon, XLPE, silicone) determine temperature rating and chemical resistance; AWG (American Wire Gauge) or mm² (European standard) sizes from 30 AWG (thin signal wire) to 8 AWG (high-current power wire); ribbon cables and FFC (Flat Flexible Cables) — multi-conductor parallel cables for flat-profile connections; AWM style ribbon cables for PCB-to-PCB connections; FFC (Flexible Flat Cable) and FPC (Flexible Printed Circuit) for display, camera, and touch panel connections in mobile devices; coaxial cables — RG-174, RG-316, LMR-100, LMR-200, RG-58 for RF signal transmission; key specs include impedance (50Ω or 75Ω), outer diameter, attenuation per metre at specific frequencies, and connector compatibility (SMA, N-type, BNC); shielded cables — twisted pair with foil/braid shield for EMC compliance; used for data communications (Ethernet Cat5e/6/6A, RS485/RS422), audio, and video signals; automotive cables — TXL, GXL, SXL (SAE J1128 standards) for automotive harness wire, rated -40°C to +125°C, available in multiple AWG sizes and colours; UL 508A industrial control panel wiring wire; and cable harness assemblies — custom-manufactured wire harnesses combining multiple cables, connectors, and strain reliefs; widely produced by Chinese, Vietnamese, and Mexican maquiladora harness manufacturers.
UL/CSA certification and RoHS compliance for cables
Cable certification is critical for electrical safety and market access. UL (Underwriters Laboratories) certification is required for cables used in North American electrical installations and equipment — UL Listed cables bear the UL Mark and are listed in the UL product directory. For general-purpose equipment wire: UL 1007 (300V, 80°C) or UL 1015 (600V, 105°C) are the most common standards. For computer and data cables: UL 2464 for multi-conductor shielded cables. CSA (Canadian Standards Association) certification is required for the Canadian market — many cables carry dual UL/CSA (cUL) marks. CE marking for cables in Europe requires compliance with the Construction Products Regulation (CPR, for fixed installation cables) with additional fire performance classifications (Euroclass Aca to Fca), or the Low Voltage Directive for appliance power cords. RoHS 3 compliance requires that all restricted substances (particularly lead in PVC stabilisers and cadmium in pigments) are below maximum concentration limits — request SGS or Intertek substance test reports for PVC-insulated cables. REACH SVHC compliance is also required for EU market cables — DEHP (di-ethylhexyl phthalate) is a common SVHC in older PVC cable formulations. For buyers sourcing cables from China for European OEM products, halogen-free (LSZH — Low Smoke Zero Halogen) insulation is increasingly specified for sustainability and fire safety reasons, despite a cost premium over standard PVC.
Frequently asked questions
What is AWG and how do I convert between AWG and mm²?
AWG (American Wire Gauge) is an American standard for wire diameter — counterintuitively, higher AWG numbers mean thinner wire (30 AWG is much thinner than 10 AWG). Common approximate conversions: 30 AWG ≈ 0.05 mm²; 28 AWG ≈ 0.08 mm²; 26 AWG ≈ 0.13 mm²; 24 AWG ≈ 0.20 mm²; 22 AWG ≈ 0.33 mm²; 20 AWG ≈ 0.52 mm²; 18 AWG ≈ 0.82 mm²; 16 AWG ≈ 1.31 mm²; 14 AWG ≈ 2.08 mm²; 12 AWG ≈ 3.31 mm². When specifying cables for European applications, use mm² cross-section; for North American applications, use AWG. The current-carrying capacity depends on both conductor cross-section and insulation temperature rating — always use derating tables for the specific installation method (free air, conduit, bundled).
What is a typical MOQ for wholesale cables and wire harnesses from China?
Hook-up wire and equipment wire (plain spool): 100–500 metres minimum per AWG and colour combination. Ribbon cables (standard pitches 1.27mm, 2.54mm): 100–500 metres or 50–200 pieces. FFC/FPC flat cables (standard catalogue sizes): 100–500 pieces. Coaxial cables (RG-174, RG-316, LMR-100): 50–500 metres minimum. Custom wire harness assemblies: 100–500 sets minimum for simple harnesses; complex automotive-grade harnesses typically 500–2,000 sets minimum with NRE tooling cost for crimping dies and assembly fixtures (USD 500–5,000 depending on complexity). For Ethernet patch cables and standard USB cables (commodity products), Chinese manufacturers accept orders from 100–1,000 pieces with no NRE cost.
Vous cherchez un fournisseur grossiste vérifié ? Parcourez les annonces maintenant.
Trouver des fournisseurs en gros sur TowoboDemander un Devis
Dites-nous ce dont vous avez besoin et obtenez des devis de plusieurs fournisseurs vérifiés
Pourquoi Demander un Devis?
- Obtenez des prix compétitifs de plusieurs fournisseurs
- Recevez des offres personnalisées selon vos besoins
- Connectez-vous directement avec des fabricants vérifiés
- Gagnez du temps avec notre service de matching
Vous achetez régulièrement ?
Créez un compte acheteur gratuit pour enregistrer des fournisseurs, leur écrire directement et payer en toute sécurité.
Pages connexes
Commencez à vous approvisionner aujourd'hui
Comparez les fournisseurs vérifiés, vérifiez le stock et connectez-vous directement, le tout en un seul endroit.
Trouver des fournisseurs en gros sur Towobo →