Logo

موردو الجملة لوحدات RF والاتصالات اللاسلكية

تأمين وحدات WiFi وBluetooth وBLE وZigbee وLoRa/LoRaWAN وNB-IoT و4G LTE و5G بالجملة من موردين معتمدين على Towobo. يُعدّ سوق الوحدات اللاسلكية لإنترنت الأشياء أحد أسرع قطاعات الإلكترونيات نمواً.

هل أنت مستعد للشراء بالجملة؟

آلاف المشترين يتزودون من موردين معتمدين على Towobo.

ابحث عن موردين على Towobo →

Wireless standards and module selection guide

Wireless module selection depends on the application's range, data rate, power consumption, and network infrastructure requirements: WiFi (IEEE 802.11 b/g/n/ac/ax) — highest data rates (54Mbps to multi-Gbps for WiFi 6), 2.4GHz and 5GHz bands, infrastructure or access point mode, moderate power consumption — used for high-bandwidth IoT applications, cameras, gateways, and consumer connected devices; key module vendors: Espressif (ESP32 — the dominant low-cost WiFi+BT SoC), Murata, u-blox, Realtek, Broadcom; Bluetooth Classic and BLE (Bluetooth Low Energy, 2.4GHz) — short range (10–100m typical), low power (BLE especially for battery-powered devices, weeks to years on coin cell), data rates 1–3 Mbps — used for wearables, health monitors, asset tracking, mesh networks; ZigBee (IEEE 802.15.4, 2.4GHz) — low power mesh networking, 250kbps data rate, 10–100m range — used in smart home automation (Philips Hue, IKEA Tradfri), industrial sensor networks, and smart meters; LoRa/LoRaWAN (sub-GHz, 433/868/915 MHz) — very long range (1–15 km in urban, up to 50 km in line-of-sight), very low power (multi-year battery life), very low data rate (0.3–50 kbps) — used for IoT sensors, smart agriculture, asset tracking, and utilities metering; key vendors: Semtech (LoRa chip designer), RAK Wireless, Dragino (both major module manufacturers); NB-IoT (Narrowband IoT) and LTE-M — 3GPP cellular IoT standards operating on licensed spectrum, used for wide-area IoT applications where infrastructure is managed; and 4G LTE and 5G modules — full cellular connectivity for high-data-rate industrial and automotive applications; key vendors: Quectel (China — dominant global IoT module vendor), Fibocom, Sierra Wireless, u-blox.

FCC Part 15, CE RED, and module certifications

Wireless module certification determines whether the module can be resold and integrated into end products without additional RF testing. FCC Part 15 (USA) — wireless modules with an FCC ID can be integrated into end products without the end-product requiring a full FCC Part 15 Class B RF test, provided the module's FCC Grant of Equipment Authorization (FCC ID) is declared in the host product documentation and installation instructions are followed (antenna separation distances, RF exposure limits). The FCC ID is searchable at fcc.gov/oet/ea/fccid. CE RED (Radio Equipment Directive, EU 2014/53/EU) — wireless modules with CE RED assessment allow similar integration exemptions in EU products when integration conditions are met. IC (Innovation, Science and Economic Development Canada) certification provides equivalent coverage for the Canadian market. For buyers in Asia, SRRC (State Radio Regulatory Commission, China), MIC (Japan), KCC (Korea), and TRAI (India) certifications are required for respective domestic markets. Quectel, Fibocom, and RAK Wireless modules routinely carry multi-region certifications (FCC+CE+IC+SRRC). Espressif ESP32 modules (WROOM, WROVER families) are among the most widely available and cost-competitive modules with FCC and CE certification, making them a default choice for cost-sensitive IoT designs. For industrial applications requiring extended temperature range, conformal coating, and ATEX compliance, u-blox, Murata, and Sierra Wireless modules are preferred.

Frequently asked questions

What is the difference between LoRa and LoRaWAN?

LoRa (Long Range) is the proprietary physical layer modulation technology developed by Semtech — it defines how RF signals are modulated over sub-GHz frequencies for long-range, low-power communication. LoRa modulation is implemented in Semtech's SX127x and SX126x ICs which are at the core of all LoRa modules. LoRaWAN is the open standard network protocol built on top of LoRa modulation, defined by the LoRa Alliance — it specifies the MAC layer, network architecture (star-of-stars), security (AES-128 encryption), device classes (A, B, C), and frequency plans for different regions (EU868, US915, AS923, etc.). A LoRa module (e.g. Semtech SX1276-based module) can be used in both LoRaWAN networks and in proprietary point-to-point LoRa links. LoRaWAN requires a LoRaWAN gateway and network server (either private or public — TTN, Chirpstack, AWS IoT Core for LoRaWAN). For custom point-to-point applications without infrastructure, LoRa P2P is simpler and does not require a gateway.

What is a typical MOQ for wholesale wireless modules from China?

Standard WiFi/BT modules (e.g. Espressif ESP32-WROOM based): 100–500 pieces minimum for commodity catalogue modules; in bulk (10,000+), pricing drops significantly. LoRa modules (SX1276-based, e.g. HopeRF RFM95W, RAK4200): 50–200 pieces minimum. 4G LTE modules (Quectel EC21, EC25 series): 50–200 pieces minimum from distributors. NB-IoT modules (Quectel BC660K): 100–300 pieces. Zigbee modules (TI CC2530/CC2652-based): 100–500 pieces. For ODM/OEM customers integrating wireless modules into custom products, direct procurement from Quectel, Fibocom, or RAK Wireless at volume pricing starts from 1,000–5,000 pieces per model with dedicated FAE (Field Application Engineer) support.

What is an FCC ID and why is it important for wireless module purchasing?

An FCC ID is a unique identifier assigned by the FCC to wireless radio devices that have been tested and authorised under FCC Part 15 (or Part 22/24/27 for cellular). For module buyers, the FCC ID matters because it enables a "modular approval" path for end products: if you integrate a pre-certified module (one with an FCC ID) into your product following the module's integration instructions, your end product may be exempt from full FCC testing for the radio functionality — you only need to declare the module's FCC ID in your product documentation. This significantly reduces certification cost and time-to-market. The FCC ID can be looked up at fcc.gov/oet/ea/fccid to verify the grant covers the intended operating frequencies and that the certification is current. When purchasing wireless modules for products destined for the US market, always confirm the module has a valid FCC ID covering your intended frequency bands and operating modes.

تبحث عن مورد جملة معتمد؟ تصفح القوائم الآن.

ابحث عن موردين على Towobo

طلب عرض سعر

أخبرنا بما تحتاجه واحصل على عروض أسعار من عدة موردين معتمدين

لماذا تطلب عرض سعر؟

  • احصل على أسعار تنافسية من عدة موردين
  • احصل على عروض مخصصة بناءً على متطلباتك
  • تواصل مباشرة مع مصنعين معتمدين
  • وفر الوقت في التوريد مع خدمة المطابقة لدينا

هل تشتري بانتظام؟

أنشئ حساب مشترٍ مجانيًا لحفظ الموردين ومراسلتهم مباشرة والدفع بحماية.

إنشاء حساب مجاني

صفحات ذات صلة

ابدأ بالتوريد اليوم

قارن بين الموردين المعتمدين، تحقق من المخزون، وتواصل مباشرة — كل ذلك في مكان واحد.

ابحث عن موردين على Towobo →