Poultry Processing Equipment Manufacturers
Connect with verified poultry processing equipment manufacturers on Towobo. Source chicken slaughter lines, scalding and defeathering machines, evisceration equipment, chilling systems, and complete automated poultry processing plants.
Ready to source wholesale?
Join thousands of buyers sourcing from verified suppliers on Towobo.
Browse Poultry Processing Equipment Suppliers →The poultry processing sequence
Automated poultry processing follows a defined sequence of stations. Live birds are shackled onto an overhead conveyor. Stunning (electrical water-bath or gas stunning) renders birds insensible before slaughter. After slaughter and bleed-out, carcasses enter the scalder — hot water at a controlled temperature loosens feathers (soft-scald at around 52°C retains yellow skin; hard-scald at 60–65°C removes cuticle for white-skin markets). Defeathering machines use rubber fingers rotating at high speed to remove feathers from the loosened carcass. After defeathering, carcasses pass through a singeing flame to remove fine hairs, then to venting, evisceration, and giblet harvesting stations. The final carcass is washed, inspected, and chilled — either by air chilling (EU standard) or water immersion chilling (common in the USA and elsewhere). After chilling, carcasses are graded and either dispatched whole or passed to a cut-up line for portioning.
Buyer guidance for poultry processing equipment
Before requesting a quotation, specify: (1) poultry species (broiler chicken, turkey, duck, or other); (2) required throughput in birds per hour; (3) average live weight range; (4) degree of automation (manual evisceration with mechanical assist vs fully automated evisceration); (5) chilling method — air chilling or water immersion; (6) downstream portioning requirements (whole birds, 8-piece cut-up, fillets, deboning); (7) relevant certification requirements (CE in the EU; USDA in the USA; Halal certification in design); (8) available utilities (electrical supply, steam, hot and cold water, compressed air, wastewater capacity); (9) available building dimensions (most poultry plants are purpose-built, but some equipment can be retrofitted into existing buildings); (10) installation, commissioning, and training support required. Slaughter-line design for Halal certification must be reviewed with the relevant Halal certification body before finalising equipment specifications.
Frequently asked questions
What is the difference between air chilling and water immersion chilling for poultry?
Air chilling cools carcasses by circulating refrigerated air (typically 0 to -2°C) over the hanging carcasses. It is mandatory in the EU (EU Regulation (EC) 853/2004 Annex III) and produces a dry-surface carcass with a longer refrigerated shelf life, but it requires more floor space and time than water chilling and results in weight loss (approximately 1–2% of carcass weight) rather than weight gain. Water immersion chilling (counter-current chiller) uses cold water to chill the carcasses rapidly. It is the standard in the USA and in many high-throughput plants globally, and carcasses absorb water (adding weight). Water chilling requires strict control of water temperature, flow rate, chlorination, and carcass contact time. The choice affects plant layout, capital cost, and the final product specification.
How is poultry processing line speed rated?
Poultry line speed is rated in birds per hour and is determined by the slowest bottleneck station on the line. Regulatory limits may also apply: in the EU, maximum line speeds for manual evisceration and inspection are controlled under veterinary hygiene regulations. Suppliers should specify the rated line speed for each equipment station and confirm that the complete line is balanced to achieve your target throughput without creating bottlenecks at any single station. Ask for the maximum operating speed, not just the theoretical design speed.
Ready to find a verified wholesale supplier? Browse listings now.
Browse Poultry Processing Equipment SuppliersRelated pages
Start sourcing today
Compare verified suppliers, check stock, and connect directly — all in one place.
Browse Poultry Processing Equipment Suppliers →