EV電池部品の卸売サプライヤー

The EV battery supply chain comprises several distinct component categories that buyers source independently or as assembled systems: lithium battery cells (the fundamental electrochemical energy storage units — available in cylindrical (18650, 21700, 4680 formats), prismatic aluminium-cased, and pouch configurations; cell chemistry variants include NMC (nickel manganese cobalt), LFP (lithium iron phosphate — dominant in China and increasingly in global entry-level EVs), and NCA (nickel cobalt aluminium)); battery modules (pre-assembled groupings of cells with inter-cell connections, thermal management interfaces, and structural housing — available from Chinese manufacturers as standardised modules for EV conversion and assembly applications); battery management systems (BMS) (electronic control units managing cell balancing, state-of-charge estimation, temperature monitoring, and protection circuitry — a critical safety component; Chinese BMS manufacturers such as Daly, JKBMS, and ANT BMS supply global aftermarket and OEM applications); DC-DC converters (high-voltage to low-voltage converters supplying 12V/24V accessories from the high-voltage traction battery — a key EV powertrain component); EV charging equipment (on-board chargers (OBC), charging cables, EVSE (electric vehicle supply equipment) for home and commercial charging, and DC fast-charge station components); battery thermal management components (cooling plates, heat exchangers, thermal interface materials, and battery heater pads); and high-voltage wiring harnesses and connectors (HV orange cable assemblies and high-voltage connectors for EV powertrain wiring). China's dominance in EV battery supply is structural — CATL holds approximately 35% of global EV battery cell capacity; BYD has vertically integrated from cells to vehicles; and China's battery ecosystem includes the world's most comprehensive supply of cathode materials (LFP, NMC), anode materials (graphite), electrolyte, and separator materials.

EV battery cells and packs are classified as dangerous goods — both the lithium-ion chemistry and the high stored energy create significant transport safety requirements. Key compliance obligations for wholesale EV battery component buyers include: UN 38.3 testing (mandatory test protocol for lithium batteries covering altitude simulation, thermal test, vibration, mechanical shock, external short circuit, impact/crush, overcharge, and forced discharge — UN 38.3 test reports must be provided by the manufacturer for every battery cell or pack being shipped); IATA DGR Section II (air freight — strict quantity limits, packing requirements, and documentation for lithium battery shipments); IMDG Code (sea freight — lithium batteries are Class 9 dangerous goods requiring compliant packaging, marking, and documentation); ADR (road transport in Europe — dangerous goods transport regulations applicable to domestic battery distribution); CE marking and Battery Regulation compliance (from February 2024, the EU Battery Regulation (EU) 2023/1542 introduces new requirements for EV batteries sold into the EU, including carbon footprint declarations, recycled content disclosures, and due diligence for supply chain sustainability); and IEC 62133 / GB/T 31485 testing (safety testing for secondary lithium cells and batteries — widely required by buyers for wholesale battery component qualification). For buyers in the EU, the EU Battery Regulation imposes significant new documentation and supply chain disclosure obligations on battery importers from 2024–2027 — buyers should engage with manufacturers and legal counsel early on compliance planning.

Sourcing wholesale EV battery components from China requires careful supplier qualification given the safety-critical nature of the products and the complexity of dangerous goods compliance. Key sourcing steps include: requesting UN 38.3 test reports for the specific cell model and batch being purchased (not generic certificates — each cell type requires its own test report); confirming the cell chemistry, nominal capacity (Ah), nominal voltage, C-rate, cycle life specification, and operating temperature range in writing; requesting IEC 62133 or equivalent safety test certificates; for BMS units, requesting functional specification sheets confirming cell count compatibility, balancing current, protection trip points, and communication protocol (UART, CAN, RS485); confirming packaging compliance for dangerous goods shipment before order placement; and for EU buyers, confirming CE marking status and EU Battery Regulation compliance documentation. CATL, BYD, and EVE Energy supply globally through authorised distribution channels — direct purchase from cell manufacturers requires minimum volume commitments typically exceeding 10MWh/year. For smaller wholesale buyers, Chinese tier-2 cell manufacturers and module assemblers offer more accessible MOQs (from 100kg / USD 5,000) with comparable UN 38.3-certified products. Towobo connects EV battery component buyers with verified Chinese manufacturers offering UN 38.3-certified cells, modules, BMS units, and charging equipment at wholesale pricing.