電子コネクタ卸売サプライヤー
Towoboで認定メーカーから基板対基板、ワイヤ対基板、丸型、車載、RFコネクタを卸売調達。グローバルコネクタ市場は800億ドル超。Amphenol・TE Connectivity・Molex・JST が主要ブランド。
Electronic connector types and applications overview
Electronic connectors are categorised by their mating direction, form factor, and application environment: board-to-board connectors (BB connectors — mezzanine or stacking connectors for connecting two parallel PCBs, available in 0.4mm to 2.54mm pitch; used in mobile devices, networking equipment, and modular electronics); wire-to-board connectors (WTB connectors — crimp-terminal connectors such as JST PH/ZH/GH/SH, Molex Micro-Fit, TE MTA series, Dupont/pin header 2.54mm — the most widely used in general electronics for wiring harness termination); wire-to-wire connectors (two wire harnesses terminated to each other, commonly used in automotive and industrial wiring); circular connectors (M12, M8, M5, M23, MIL-DTL-38999, Amphenol Circular Plastic Connectors — used in industrial automation, robotics, and harsh-environment applications requiring robust mating with IP rating); automotive connectors (USCAR-2 specification connectors, 0.35mm to 2.8mm pitch, sealed and unsealed — designed for automotive temperature ranges -40°C to +125°C and automotive vibration/shock; major systems include Delphi/Aptiv, TE DEUTSCH, Yazaki, and Sumitomo); USB, HDMI, DisplayPort, and standard consumer connectors; and RF/coaxial connectors (SMA, N-type, BNC, SMP, MMCX — for RF signal transmission in antennas, test equipment, and telecommunications).
IP rating, mating cycles, and quality tiers
Connector performance specifications critical to wholesale purchasing: IP (Ingress Protection) rating — IP67 means dust-tight and immersion-resistant to 1m for 30 minutes; IP68 means continuous immersion; IP69K means high-pressure water wash-down resistance; mating cycle life — consumer-grade connectors specify 30–100 mating cycles; industrial connectors 500–1,000 cycles; military and aerospace 500+ cycles with gold-plated contacts for maximum durability; UL 94 flammability rating — UL 94 V-0 (self-extinguishing within 10 seconds after flame removal) is required for connectors inside electrical enclosures; voltage and current rating — always derate connectors to 80% of rated current in continuous use; contact plating — gold plating (flash gold or selective gold) provides the most reliable electrical connection, especially for low-force applications; tin plating is cost-effective for higher-force mated connectors where fretting is not a concern; and USCAR-2 for automotive connectors — the US Car Alliance standard for connector system reliability, specifying temperature, humidity, corrosion, vibration, and mechanical cycling requirements. In connector quality tiers: Tier 1 (Amphenol, TE Connectivity, Molex, JST, Hirose, JAE — full UL/CSA certification, comprehensive documentation, global distribution); Tier 2 (Chinese manufacturers with UL certification, CE marking: Cvilux, Foxconn Interconnect, Yueqing-based manufacturers — competitive pricing, adequate quality for commercial applications); Economy tier (uncertified commodity connectors — suitable only for non-critical consumer applications).
Frequently asked questions
What is the JST connector series and how do I select the right pitch?
JST (Japan Solderless Terminal) is one of the world's most widely used wire-to-board connector brands, with multiple families distinguished primarily by pitch (centre-to-centre pin spacing): JST PH (2.0mm pitch) — commonly used for battery connections in RC vehicles and IoT devices; JST ZH (1.5mm pitch) — compact, used in portable electronics; JST GH (1.25mm pitch) — used in FPV drones and miniaturised electronics; JST SH (1.0mm pitch) — ultra-compact, used in ultra-thin wearables; JST XH (2.5mm pitch) — standard hobby/RC connector; JST VH (3.96mm pitch) — higher current capacity, used in small appliances. When selecting connectors, always match pitch, pin count, housing lock style, and contact current rating to your application. Chinese JST-compatible connectors are widely available and cost-effective for non-critical applications, but certified OEM JST connectors should be used for applications requiring JST's full performance specifications.
What is the typical MOQ for wholesale electronic connectors from China?
Standard commodity connectors (2.54mm pitch headers, JST-compatible series, USB, HDMI) from Chinese manufacturers: MOQs of 100–500 pieces per SKU (connector body or contact/terminal kit). Mixed connector orders are commonly accepted at a minimum order value of USD 300–1,000. For circular connectors (M12, M8): 50–200 pieces per variant. Automotive-grade sealed connectors: typically 100–500 sets. Custom moulded connector tooling requires NRE (non-recurring engineering) investment and minimum production quantities — tooling costs range from USD 3,000–20,000 depending on complexity, with minimum production runs of 5,000–50,000 pieces.
認証済み卸売サプライヤーをお探しですか？今すぐリスティングを確認。
Towoboで卸売サプライヤーを探す見積もりを依頼
必要なものを教えていただければ、複数の認証済みサプライヤーから見積もりを取得できます
なぜ見積もりを依頼するのか？
- 複数のサプライヤーから競争力のある価格を取得
- 要件に基づいたカスタマイズされたオファーを受け取る
- 認証済みメーカーと直接つながる
- マッチングサービスで調達時間を節約
定期的に仕入れていますか？
無料のバイヤーアカウントを作成して、サプライヤーを保存し、直接メッセージを送り、保護された支払いを利用しましょう。