带盖塑料桶批发供应商
在Towobo上从经认证的B2B供应商处批量采购带盖塑料桶——5L至25L PP和HDPE桶，配卡扣盖、撬盖及螺旋盖，适用于食品、涂料及化工行业。
没找到需要的产品？
Pail sizes, materials, and lid configurations
Plastic pails are available in metric sizes (1L, 2L, 3L, 5L, 10L, 15L, 20L, 25L) and US gallon sizes (1 gallon, 2 gallon, 3.5 gallon, 5 gallon, 6 gallon). The 5-gallon (approximately 18.9L) pail is the dominant size in North America; the 10L and 20L sizes are standard in Europe and many other markets. Material: PP pails are standard for most applications — lighter weight, wide temperature range, good chemical resistance, food-contact approved. HDPE pails offer better chemical resistance, better impact performance at low temperatures, and are specified for aggressive chemical packaging and outdoor storage in cold climates. Lid types: snap-on (press-fit) lids are the standard for paint and construction materials. Lever-off (tamper-evident) lids with a metal or plastic ring provide a one-time tamper seal — used for premium food products and chemicals where tamper evidence is required. Screw lids provide the most secure closure and are used for liquids and semi-liquid products. Gamma-seal lids (reusable screw-in lid insert) are used in some industrial applications. Confirm the lid type required for your product and confirm the liner ring or gasket specification where liquid tightness is required.
Food-grade pails, paint pails, and chemical pails — key differences
The key difference between food-grade and general-purpose pails is the material certification and manufacturing environment. Food-grade pails: produced from food-contact approved PP or HDPE with a Declaration of Compliance (EU Regulation 10/2011 or FDA 21 CFR); produced in a clean manufacturing environment; tested for migration of substances into food. General-purpose pails for paint and construction: do not require food-contact compliance — standard PP or HDPE is acceptable; typically available at lower cost but should not be repurposed for food use. Chemical pails: must be compatible with the chemical being packaged — verify chemical compatibility for the specific material, concentration, and storage temperature. For UN-regulated dangerous goods, UN performance certified pails are required — confirm UN marking availability with the supplier. Do not substitute a food-grade pail specification with a general-purpose pail when the product will contact food, even for cost reasons.
Frequently asked questions
What is the difference between a pail and a bucket?
In most markets, pail and bucket are used interchangeably for round, open-top, handled containers of similar capacity. In packaging industry usage, pail often specifically refers to a container designed for product packaging with a lid (paint pail, food pail), while bucket more commonly refers to a general-purpose container without a lid or with a simple snap-on lid used for carrying and storage tasks. For B2B sourcing, the practical distinction is the lid type and sealing specification — confirm the lid configuration required for your specific application regardless of the term used.
What is the UN number certification required for chemical pails?
For packaging dangerous goods for transport, pails must be UN certified to the UN Model Regulations classification requirements. For solid dangerous goods in pails, the appropriate designation is UN 4G (plastic pails with lids). For liquid dangerous goods, UN 3H2 (HDPE round pail) may be required. The specific UN certification required depends on the packing group (I, II, or III) and physical state of your product. Confirm the required UN marking with your hazardous goods transport adviser before ordering. Not all pail manufacturers produce UN-certified packaging — confirm availability specifically.
What is the typical carton pack for 5-gallon plastic pails?
Standard 5-gallon (approximately 18.9L) PP pails are typically packed 4 per carton in a nested configuration (lids packed separately) or individually boxed without nesting. A 20ft container can hold approximately 1,000–1,500 standard 5-gallon pails depending on packing configuration. For lidded pails shipped assembled, fewer fit per container due to the lid preventing nesting. Request exact packing configuration and carton dimensions from the supplier to calculate freight cost and container utilisation.
Can I source plastic pails with custom printing or IML decoration?
Yes — plastic pails can be supplied with IML (in-mould label) decoration, pad printing, screen printing, or with a plain unprinted body for customer-applied labels. IML is the premium option for branded consumer-facing products (honey, paint, hardware products) where label durability and print quality matter. Pad and screen printing suits simpler branding requirements. For IML, confirm the label area coverage, maximum colour count, and minimum order quantity for the specific pail size. Request pre-production print proofs before confirming the order.
寻找经过验证的批发供应商？立即浏览列表。
在Towobo上查找带盖塑料桶供应商towobo 上的供应商
暂无供应商上架此产品。请在下方告诉我们您的需求，我们会为您寻找合适的供应商。
请求报价
告诉我们您的需求，从多个认证供应商获取报价
为什么请求报价？
- 从多个供应商获取有竞争力的价格
- 根据您的要求获取定制报价
- 直接与认证制造商联系
- 通过我们的匹配服务节省采购时间
经常采购？
免费创建买家账户，收藏供应商、直接联系他们并享受付款保障。