Metal beton hunisi tedarikçileri
Towobo'daki doğrulanmış tedarikçilerden metal beton hunisi temin edin — inşaat beton yerleştirme için Q235 çelik, galvanizli ve dökme demir.
Toptan kaynak bulmaya hazır mısınız?
Binlerce alıcı Towobo'daki doğrulanmış tedarikçilerden satın alıyor.
Beton hunisi tedarikçilerini keşfet →Metal concrete funnels — types, specifications, and procurement
Metal concrete funnels (also called concrete placement funnels or tremie funnels) are used in construction to direct concrete flow into formwork, pile foundations, columns, and confined spaces. They are an essential site tool for any contractor placing ready-mixed or site-mixed concrete in locations where direct chute access is impractical.
Common specifications: mild steel (Q235 or S235JR grade), 3–6mm wall thickness, cone angles of 60–120°, outlet diameters from 150mm to 350mm, and inlet diameters from 400mm to 800mm. Galvanised steel versions are preferred for repeated use in wet environments. Heavy-duty cast iron funnels are used for permanent or semi-permanent installation. Surface finishes include hot-dip galvanising, epoxy coating, and plain mill finish.
For wholesale procurement, funnels are typically sold per piece or in pallet lots of 10–50 pieces. Custom dimensions — outlet diameter, cone angle, handle attachment type, and flange pattern — are available from most steel fabricators at MOQs of 20–50 pieces. Buyers should specify wall thickness, material grade, surface treatment, and any connection standard (e.g. BS, DIN, ASTM flange dimensions) when requesting quotes.
Frequently asked questions
What material is best for metal concrete funnels?
Mild steel (Q235/S235JR) is the standard material for construction-grade concrete funnels — it offers adequate strength, easy fabrication, and competitive pricing. Galvanised steel extends service life in wet or corrosive environments. Cast iron is used for heavy-duty or permanent installations where durability is prioritised over weight. For lightweight site use, pressed steel with a 3–4mm wall thickness is the most common procurement specification.
Can I order custom-size concrete funnels?
Yes — most metal fabrication suppliers offer custom sizing for concrete funnels at relatively low MOQs (20–50 pieces). Specify outlet diameter, inlet diameter, cone angle, wall thickness, material grade, and surface treatment. Chinese and Indian fabricators can typically turn around custom samples within 7–14 days and complete production orders within 3–6 weeks.
What are typical MOQ and lead times?
Standard catalogue funnels from Chinese or Indian suppliers typically have MOQs of 10–50 pieces with lead times of 2–4 weeks. Custom fabricated orders start at 20–50 pieces with 4–6 week production lead times. Turkish suppliers serving European buyers offer slightly higher prices but shorter shipping lead times to EU destinations.
What quality standards apply to metal concrete funnels?
Concrete funnels are a fabricated tool product, so formal certification is typically limited to material certification (mill test certificate for the steel plate used) and dimensional inspection. For EU buyers, CE marking under the Machinery Directive or General Product Safety Regulation applies. Buyers should request a mill test certificate (MTC) for the base steel and a dimensional inspection report.
Teklif İste
Neye ihtiyacınız olduğunu söyleyin ve birden fazla doğrulanmış tedarikçiden teklif alın
Neden Teklif İstemelisiniz?
- Birden fazla tedarikçiden rekabetçi fiyatlar alın
- Gereksinimlerinize göre özelleştirilmiş teklifler alın
- Doğrulanmış üreticilerle doğrudan bağlantı kurun
- Eşleştirme hizmetimizle tedarikte zaman kazanın
Düzenli alım mı yapıyorsunuz?
Tedarikçileri kaydetmek, onlara doğrudan yazmak ve korumalı ödeme yapmak için ücretsiz alıcı hesabı oluşturun.
İlgili sayfalar
Bugün kaynaklamaya başlayın
Doğrulanmış tedarikçileri karşılaştırın, stoku kontrol edin ve doğrudan bağlantı kurun, hepsi tek bir yerde.
Beton hunisi tedarikçilerini keşfet →